Residential & Commercial Irrigation

Flow-Clik™

Sensor: Flow

Add high-flow shutoff capabilities to any irrigation controller with this simple, adjustable device.

Product Tabs

Overview

A ruptured pipe or broken sprinkler left undetected can result in substantial damage. Plants and ground cover can be flooded, slopes can be eroded, and hundreds of liters of water can be wasted. Hunter created the Flow-Clik flow sensor to guard against these damages in the event of a rupture. The Flow-Clik can be programmed at a specified level of flow. It will shut down irrigation if it detects a flow rate higher than the programmed limit. Therefore, the amount of water loss and system damage is substantially reduced in the event of high external leakage.

Key Benefits

Key Benefits

Automatically shuts down entire system if an overflow condition occurs, helping to protect against flood damage and erosion
Single-button calibration to set highest flow rate
User-adjustable timing and delay for sensor response
Compatible with all Hunter AC-powered controllers for a variety of applications
Multi-colour LED indicates system status and if flow is within limits

Models

Order Information - Model Builder

Let us help configure the right product for you.

Flow-Clik™

Choose your model

Models

FLOW-CLIK

Standard kit for all 24 VAC controllers. Includes sensor and interface module, sensor requires FCT for pipe installation.

Select user-installed options

REQUIRED USER INSTALLED OPTION (SPECIFY SEPARATELY)

FCT-100

25 mm (1") Schedule 40 sensor receptacle tee

Qty

FCT-150

40 mm (1½") Schedule 40 sensor receptacle tee

Qty

FCT-158

40 mm (1½") Schedule 80 sensor receptacle tee

Qty

FCT-200

50 mm (2") Schedule 40 sensor receptacle tee

Qty

FCT-208

50 mm (2") Schedule 80 sensor receptacle tee

Qty

FCT-300

80 mm (3") Schedule 40 sensor receptacle tee

Qty

FCT-308

80 mm (3") Schedule 80 sensor receptacle tee

Qty

FCT-400

100 mm (4") Schedule 40 sensor receptacle tee

Qty

Specs

Flow-Clik sensor and module shown with required FCT fitting for pipe installation (sold separately)

Flow-Clik sensor and module shown with required FCT fitting for pipe installation (sold separately)

Operating Specifications

Recommended pressure range: 1.5 to 15.0 bar; 150 to 1500 kPa
Current draw (24 VAC): 0.025 A
Switching current: 2 A maximum
Sensor wiring: 2 x direct burial, 0.75 mm2 or greater, colour-coded or marked for polarity, up to 300 m from the interface module
Programmable start up delay: 0 to 300 seconds (allows for system hydraulics to stabilise and prevents false flow readings)
Programmable interrupt period: 5 to 60 minutes (or option to reset manually)
Warranty period: 5 years

User-Installed Options

FCT fittings for 25 mm to 100 mm pipe diameters

Flow-Clik Flow Range

Pipe Diameter	Operating range (l/min)
Pipe Diameter	Minimum	Suggested maximum*
25 mm	23	64
40 mm	50	132
50 mm	76	208
80 mm	150	450
100 mm	225	750

* Good design practice dictates the maximum flow not to exceed 1.5 m/sec. Suggested maximum flow is based upon Class 200 IPS plastic pipe.

Documents

Manuals

Flow-Clik Owner's Manual

Flow-Clik IMMS Owner's Manual

Flow-Clik Instruction Card

Literature

Flow-Clik Brochure

Flow-Clik Brochure

Flow-Clik Product Cutsheet

Flow-Clik Product Cutsheet

3D BIM Models

Flow-Clik Installation Drafting Detials

Flow-Clik Installation Drafting Details RVT

Flow-Clik Interface Module RFA

Flow-Clik Sensor RFA

Specification

Flow-Clik Written Specification

Sensors - Written Specifications - MasterSpec®

Photos

Studio

Photos Data Placeholder

Clik Sensor Comparison Chart

View More Sensors >>

Safeguard Yourself From the Elements
Installing Clik sensors allows a controller to sense rapidly changing weather and react to individual conditions like rain, high wind, or freezing temperatures.


	Mini-Clik^™	Rain-Clik^™	Freeze-Clik^™	Wind-Clik^™	Flow-Clik^™	Soil-Clik^™
QUICK SPECS
Sensor Type	Rain/Freeze***	Rain/Freeze	Freeze	Wind	Flow	Soil
Available Wireless	Yes	Yes	No	No	No	No
Compatible Controllers	ACC ACC2 HC HCC HPC I-Core ICC2 Pro-C Pro-HC PCC X2 X-Core XC Hybrid NODE NODE-BT WVC	ACC ACC2 HC HCC HPC I-Core ICC2 Pro-C Pro-HC PCC X2 X-Core XC Hybrid* NODE* NODE-BT* WVC*	ACC ACC2 HC HCC HPC I-Core ICC2 Pro-C Pro-HC PCC X2 X-Core XC Hybrid NODE NODE-BT WVC	ACC ACC2 HC HCC HPC I-Core ICC2 Pro-C Pro-HC PCC X2 X-Core XC Hybrid NODE NODE-BT WVC	ACC ACC2 HC HCC HPC I-Core ICC2 Pro-C Pro-HC PCC X2 X-Core	ACC ACC2 HC HCC HPC I-Core ICC2 Pro-C Pro-HC PCC X2 X-Core NODE-BT**
FEATURES
Quick Response™	***
Warranty	5 Years	5 Years	5 Years	5 Years	5 Years	5 Years
Applications
Rain Sensor
Freeze Sensor	***
Wind Sensor
Flow Sensor
Soil Sensor

* For use with wired models only.

** For use with SC-PROBE soil moisture sensor only.

*** For use with wireless models only

Select A Language

Copyright © 2024 Hunter Industries™. All rights reserved. Privacy Policy

Back to Top